EMI/RFI Shielding

Board Level Shielding

Specified by engineers around the world, Orbel's standard and custom board level shielding (BLS) offers unlimited design flexibility for surface-mount and through-hole configurations. With an array of standard shields that can be customized to any performance requirement, Orbel specializes in today's most challenging EMI/RFI shielding applications. BLS shielding can also be custom-engineered from start to finish based on your specific need.

  • Unlimited shield sizes
  • Variety of material options
  • Multiple fence/cover retention methods
  • Variety of pin and surface-mount styles
  • Custom trace notches at no extra cost
  • Standard ventilation holes
  • EZ-Marking™ part number and logo identification
  • Standard pick target for pick and place
  • Available in tape-and-reel or tray packaging
  • RoHS-compliant

Transforming Concept Into Solution

Backed by decades of success, unmatched expertise in EMI/RFI suppression, and a commitment to today's newest manufacturing technology, Orbel's engineering team can transform any board level shielding concept into a high-performance reality. We also offer the industry's fastest turnaround times, minimal startup costs, and unmatched customer service. Whether you're in need of one-piece, two-piece, multi-cavity, or custom-configured board level shielding, Orbel is the one name you need to know.

EZ-Shield Guardian™ Surface-Mount
EZ-Shield Guardian™ Surface-Mount >

EZ-Shield Guardian™ Surface-Mount

The EZ-Shield Guardian surface-mount shield is a one-piece circuit board shield with alignment pins to ensure stability during reflow and soldering. Meets one-piece shield requirements in both low- and high-profile applications. Ideal for inaccessibility to components, where cost is highly important.

FEATURES
  • Shield heights ranging from 0.030" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Alignment pins centrally located on each side
  • Standard tight corners 
OPTIONS
  • Unlimited board shield sizes and configurations
  • Cover ventilation holes for thermal concerns
  • Modified pin styles or pin spacing
  • Castellation edge for ease of soldering
  • Variety of corner options (louvered, welded, or soldered)
  • Logo or part number identification
  • Notches or entry hole for traces
Orbel Part Number A B C Pin Width Pin Length D E
 
G-0500SA0675-0090XC 0.500" 0.675" 0.090" 0.040" 0.020" 0.250" 0.337"
G-0500SA1000-0150XC 0.500" 1.000" 0.150" 0.040" 0.020" 0.250" 0.500"
G-0600SC0750-0150XC 0.600" 0.750" 0.150" N/A N/A N/A N/A
G-0750SA1125-0200XC 0.750" 1.125" 0.200" 0.040" 0.020" 0.375" 0.562"
G-1000SA1500-0250XC 1.000" 1.500" 0.250" 0.040" 0.020" 0.500" 0.750"
G-1500SA1750-0400XC 1.500" 1.750" 0.400" 0.040" 0.020" 0.750" 0.875"
G-1750SA2500-0500YC 1.750" 2.500" 0.500" 0.040" 0.020" 0.875" 1.250"

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

One-piece surface-mount shield with alignment pins.

EZ-Shield Guardian™ Through-Hole
EZ-Shield Guardian™ Through-Hole >

EZ-Shield Guardian™ Through-Hole

The EZ-Shield Guardian through-hole circuit board shield is a one-piece shield with mounting pins. Meets one-piece shield requirements in both low- and high-profile applications. Ideal for inaccessibility to components, where cost is highly important.

FEATURES
  • Shield heights ranging from 0.030" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Standard pin spacing is 0.250", 0.500", and 1.00"
  • Standard tight corners 
OPTIONS
  • Unlimited board shield sizes and configurations
  • Cover ventilation holes for thermal concerns
  • Modified pin styles or pin spacing
  • Variety of corner options (louvered, welded, or soldered)
  • Logo or part number identification
  • Notches or entry hole for traces
Orbel Part Number A B C Pin Width Pin Length Pin Spacing
 
G-0500TB0675-0080XC 0.500" 0.675" 0.080" 0.040" 0.080" 0.500"
G-0500TB1000-0150XC 0.500" 1.000" 0.150" 0.040" 0.080" 0.500"
G-0750TB1125-0250XC 0.750" 1.125" 0.250" 0.040" 0.080" 0.500"
G-1000TB1500-0350XC 1.000" 1.500" 0.350" 0.040" 0.080" 0.500"
G-1500TB1750-0400XC 1.500" 1.750" 0.400" 0.040" 0.080" 0.500"
G-1750TB2500-0500YC 1.750" 2.500" 0.500" 0.040" 0.080" 0.500"

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

One-piece through-hole shield with mounting pins.

Snap-Shield Bullzeye™ >

Snap-Shield Bullzeye™

The Snap-Shield Bullzeye is a two-piece surface-mount shield with castellated edges for easy soldering and trace pass-through. Added part stability helps achieve maximum co-planarity in the reflow process.

FEATURES
  • Shield heights ranging from 0.090" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Pick target for pick-and-place automation
  • Louvered corners for high RFI integrity 
OPTIONS
  • Unlimited board shield sizes and configurations
  • Modified pin styles or pin spacing
  • Variety of corner options (welded or soldered)
  • Modified trace notches or castellated edges
  • Cover ventilation holes for thermal concerns
  • Can be supplied in tape-and-reel for automation purposes
  • Logo or part number identification
Orbel Part Number A B C Mating Cover Part #
 
B-0500SB0750-0090XF 0.500" 0.750" 0.090" B-0500CC0750-0090XC
B-0625SB1125-0115XF 0.625" 1.125" 0.115" B-0625CC1125-0115XC
B-0875SB1375-0190XF 0.875" 1.375" 0.190" B-0875CC1375-0190XC
B-1000SB1000-0140XF 1.000" 1.000" 0.140" B-1000CC1000-0140XC
B-1125SB1500-0190XF 1.125" 1.500" 0.190" B-1125CC1500-0190XC
B-1250SB2250-0165XF 1.250" 2.250" 0.165" B-1250CC2250-0165XC

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece surface-mount shield with castellated edges.

Snap-Shield LaZerLoc™ Surface-Mount
Snap-Shield LaZerLoc™ Surface-Mount >

Snap-Shield LaZerLoc™ Surface-Mount

The two-piece Snap-Shield LaZerLoc surface-mount shield features alignment pins that ensure stability during reflow and soldering. Zero corner slots for high RFI integrity when specifying larger and more complicated shields in hand placement applications.

FEATURES
  • Shield heights ranging from 0.090" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Fully welded frame (no corner seams)
  • Standard 0.080" fence flange increases rigidity
  • Standard dimple and slot cover retention
OPTIONS
  • Unlimited board shield sizes and configurations
  • Modified pin styles or pin spacing
  • Notches or entry holes for traces 
  • Cover ventilation holes for thermal concerns
  • Logo or part number identification
Orbel Part Number A B C D E Mating Cover Part #
 
L-0700SA0900-0090XF 0.700" 0.900" 0.090" 0.350" 0.450" L-0700CC0900-0090XC
L-0900SA1375-0190XF 0.900" 1.375" 0.190" 0.450" 0.687" L-0900CC1375-0190XC
L-1250SA1250-0240XF 1.250" 1.250" 0.240" 0.625" 0.625" L-1250CC1250-0240XC
L-1300SA1750-0340XF 1.300" 1.750" 0.340" 0.650" 0.875" L-1300CC1750-0340XC
L-1500SA2250-0390XF 1.500" 2.250" 0.390" 0.750" 1.125" L-1500CC2250-0390XC
L-2250SA3000-0490YF 2.250" 3.000" 0.490" 1.125" 1.500" L-2250CC3000-0490YC

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece surface-mount shield with alignment pins.

Snap-Shield LaZerLoc™ Through-Hole
Snap-Shield LaZerLoc™ Through-Hole >

Snap-Shield LaZerLoc™ Through-Hole

The two-piece Snap-Shield LaZerLoc through-hole shield features mounting pins. Zero corner slots for high RFI integrity when specifying larger and more complicated shields in hand placement applications.

FEATURES
  • Shield heights ranging from 0.090" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Fully welded frame (no corner seams)
  • Standard 0.080" fence flange increases rigidity
  • Standard dimple and slot cover retention
OPTIONS
  • Unlimited board shield sizes and configurations
  • Modified pin styles or pin spacing
  • Notches or entry holes for traces
  • Cover ventilation holes for thermal concerns
  • Logo or part number identification
Orbel Part Number A B C Pin Width Pin Length Mating Cover Part #
 
L-0500TB0750-0100XF 0.500" 0.750" 0.100" 0.040" 0.080" L-0500CC0750-0100XC
L-0625TB1125-0125XF 0.625" 1.125" 0.125" 0.040" 0.080" L-0625CC1125-0125XC
L-0875TB1375-0250XF 0.875" 1.375" 0.250" 0.040" 0.080" L-0875CC1375-0250XC
L-1000TB1000-0150XF 1.000" 1.000" 0.150" 0.040" 0.080" L-1000CC1000-0150XC
L-1375TB1750-0200XF 1.375" 1.750" 0.200" 0.040" 0.080" L-1375CC1750-0200XC
L-1750TB2250-0300YF 1.750" 2.250" 0.300" 0.040" 0.080" L-1750CC2250-0300YC

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece through-hole shield with mounting pins.

Snap-Shield Micro™ >

Snap-Shield Micro™

The Snap-Shield Micro offers the lowest two-piece surface-mount shield assembly in the industry. Ideal when space is limited but a two-piece shield is required. Added part stability helps achieve maximum co-planarity.

FEATURES
  • Shield heights ranging from 0.058" to 0.100"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thickness: 0.008"
  • Standard pick target for pick-and-place automation
  • Mini-dimple and slot cover retention method
  • Standard tight corners
OPTIONS
  • Unlimited board shield sizes and configurations
  • Notches or entry hole for traces
  • Cover ventilation holes for thermal concerns
  • Variety of shield-to-board options (pins, castellations)
  • Logo or part number identification
  • Can be supplied in tape-and-reel or tray packaging
Orbel Part Number A B C Mating Cover Part #
 
M-0515SC0560-0050ZF 0.515" 0.560" 0.050" M-0515CC0560-0050ZC
M-0600SC0950-0060ZF 0.600" 0.950" 0.060" M-0600CC0950-0060ZC
M-0735SC0865-0070ZF 0.735" 0.865" 0.070" M-0735CC0865-0070ZC
M-0925SC1100-0080ZF 0.925" 1.100" 0.080" M-0925CC1100-0080ZC

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

The lowest two-piece surface-mount shield assembly in the industry.

Snap-Shield Hemi™
Snap-Shield HEMI™ >

Snap-Shield HEMI™

The Snap-Shield HEMI is a two-piece through-hole shield offering maximum component accessibility with a unique hemmed frame. Used when specifying larger, more complicated shields in hand placement applications.

FEATURES

  • Shield heights ranging from 0.200" to 2.00"
  • Hemmed frame offers maximum component accessibility
  • Rigid, fully welded frame (no corner seams
  • Revolutionary hem and dimple cover retention

OPTIONS

  • Unlimited board shield sizes and configurations
  • Notches or entry hole for traces
  • Cover ventilation holes for thermal concerns
  • Variety of shield-to-board options (pins, castellations)
  • Logo or part number identification
  • Can be supplied in tape-and-reel or tray packaging
Orbel Part Number A B C D Pin Width Pin length Pin Spacing Mating Cover Part #
H-1750TB2500-0500YF 1.750" 2.500" 0.500" 0.150" 0.040" 0.080" .0500" H-1750CC2500-0500YC
H-2600TB3450-0200YF 2.600" 3.450" 0.200" 0.150" 0.040" 0.080" .0500" H-2600CC3450-0200YC
H-3500TC5325-0375YF 3.500" 5.325" 0.375" 0.150" 0.040" 0.080" 1.000" H-3500CC5325-0375YC

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece through-hole shield offering maximum component accessibility.

Snap-Shield Kontour™ >

Snap-Shield Kontour™

The Snap-Shield Kontour is a one-piece shield configuration with a multi-plane cover to conform to irregular height components under one shielded enclosure. Used when space is limited or when product shape dictates design.

FEATURES

  • Shield heights ranging from 0.100" to 2.00"
  • Surface-mount or through-hole design
  • Multi-plane configurations
  • Standard dimple and slot cover retention

OPTIONS

  • Unlimited board shield sizes and configurations
  • Notches or entry hole for traces
  • Cover ventilation holes for thermal concerns
  • Variety of shield-to-board options (pins, castellations)
  • Logo or part number identification
  • Can be supplied in tape-and-reel or tray packaging

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

One-piece shield configuration with a multi-plane cover.

Snap-Shield Kontour-Pro™ >

Snap-Shield Kontour-Pro™

The Snap-Shield Kontour-Pro is a two-piece shield configuration with a multi-plane cover to conform to irregular height components under one shielded enclosure. Used when space is limited or when product shape dictates design.

FEATURES

  • Shield heights ranging from 0.100" to 2.00"
  • Material thickness: 0.010"
  • Surface-mount or through-hole design
  • Multi-plane configurations
  • Standard dimple and slot cover retention

OPTIONS

  • Unlimited board shield sizes and configurations
  • Notches or entry hole for traces
  • Cover ventilation holes for thermal concerns
  • Variety of shield-to-board options (pins, castellations)
  • Logo or part number identification
  • Can be supplied in tape-and-reel or tray packaging

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece shield configuration with a multi-plane cover.

Vault-Shield™
Vault-Shield™ >

Vault-Shield™

The Vault-Shield is a two-piece through-hole shield used primarily in extreme shock and vibration applications. The Vault-Shield's tab and slot retention method provides the added security of today's best cover-to-frame retention.

FEATURES
  • Shield heights ranging from 0.030" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Fully welded frame (no corner seams)
  • Standard pin spacing is 0.250", 0.500", and 1.00"
OPTIONS
  • Unlimited board shield sizes and configurations
  • Surface-mount configurations
  • Modified pin styles or pin spacing
  • Modified tab and slot spacing
  • Notches or entry hole for traces
  • Cover ventilation holes for thermal concerns
  • Logo or part number identification
Orbel Part Number A B C # Tabs Locking Tab Spacing Mating Cover Part #
 
V-0750TB1500-0200YF 0.750" 1.500" 0.200" 6 1.000" V-0750CC1500-0200YC
V-1375TB2250-0350YF 1.375" 2.250" 0.350" 6 1.000" V-1375CC2250-0350YC
V-2000TB3500-0500YF 2.000" 3.500" 0.500" 6 1.000" V-2000CC3500-0500YC

Custom-Configure

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.

Two-piece through-hole shield ideal for extreme shock and vibration applications.

MultiCAV™
MultiCAV™ >

MultiCAV™

The MultiCAV is a compartmentalized shield that combines multiple shields into one, saving valuable board space while reducing shield weight and overall costs. MultiCAV shields typically have two-piece construction with inner walls strategically placed while utilizing one common cover.

Orbel's family of standard MultiCav shields is available in two distinct styles:

MultiCav SmartFORM™ Formed from one sheet of material to create the shield's inner walls. Can be designed with an optional pick target for tape-and-reel automation.

MultiCav FASweld™ Used when your design calls for a complicated multi-cavity construction. The shield's inner walls are welded to the perimeter frame to create multi-compartments.

FEATURES
  • Shield heights ranging from 0.075" to 2.00"
  • Materials: nickel silver, brass, copper, beryllium copper, cold rolled steel, phosphor bronze, magnetic materials
  • Material thicknesses: 0.008", 0.010", and 0.015"
  • Standard dimple and slot cover retention
  • Customized to board trace specifications
  • Locking tabs for inner wall and cover grounding
OPTIONS
  • Unlimited board shield sizes and configurations
  • Modified pin styles or pin spacing
  • Notches or entry hole for traces
  • Can be designed for pick-and-place applications
  • Cover ventilation holes for thermal concerns
  • Logo or part number identification

Accepted file formats: gif, jpg, png, bmp, pdf

7
v
f
Q
p
5
Enter the code without spaces.
  • MultiCAV™

Compartmentalized shield that combines multiple shields into one.